APEO‑Free Universal Zirconium Drier CAS 22464-99-9 Water‑Solvent Dual‑Use Alkyd
APEO‑Free Universal Zirconium Drier is APEO‑free modified zirconium octoate auxiliary drier with CAS 22464‑99‑9. It features unique dual‑system compatibility, performing stably in both solvent‑borne alkyd and water‑reducible alkyd formulations. Zirconium component accelerates deep‑layer through‑curing, improves film hardness, gloss and substrate adhesion, and reduces pigment‑caused drier adsorption loss. Without APEO surfactants, it meets eco‑friendly coating requirements. It cannot work indepen
Product Overview
APEO‑Free Universal Zirconium Drier belongs to APEO‑free multi‑functional zirconium carboxylate auxiliary drier (CAS 22464‑99‑9), designed for oxidative‑cure alkyd systems covering both solvent‑borne and water‑reducible grades. Traditional production lines need to purchase separate solvent‑type and water‑type zirconium driers for different paint formulas, raising inventory pressure and formula management complexity. This product adopts special ligand modification technology, delivering good solubility in organic solvent medium and stable dispersibility in aqueous paint matrix. No APEO‑class surfactants are introduced. Zirconium acts as auxiliary drier to boost deep‑film oxidative cross‑linking, optimize hardness development and interfacial adhesion. It must be matched with primary driers such as cobalt or manganese and cannot be used alone. It shows excellent compatibility with long‑oil, medium‑oil alkyd resins in both solvent‑based and water‑dilutable systems and maintains stable batch‑to‑batch quality.
Key Features
‑ APEO‑free universal zirconium auxiliary drier, raw material CAS 22464‑99‑9 ‑ Water‑solvent dual‑use performance, fits both solvent‑borne and water‑reducible alkyd systems ‑ Eliminates APEO substances, complies with eco‑friendly raw‑material specifications ‑ Powerful through‑drying capacity, improves film hardness, gloss and substrate adhesion ‑ Reduces drier adsorption loss induced by pigments, stabilizes curing performance in pigmented paints ‑ One single drier covers multiple paint lines, simplifies drier inventory and formula management ‑ Good compatibility with various pigments, fillers and alkyd binders of solvent‑borne / water‑reducible grades ‑ Reliable batch‑to‑batch consistency for mass‑production of dual‑system alkyd coatings
Technical Specifications
‑ Product Name: APEO‑Free Universal Zirconium Drier ‑ CAS No.: 22464‑99‑9 ‑ Active Component: Modified Zirconium 2‑Ethylhexanoate, APEO‑free formula ‑ Zirconium Content: 9% min ‑ Appearance: Pale yellow transparent liquid ‑ Solubility: Soluble in aliphatic solvents, water‑dispersible for water‑reducible alkyd ‑ Density: 1.01‑1.07 g/cm³ @25℃ ‑ Viscosity: Low‑viscosity liquid ‑ Flash Point: ≥60℃ ‑ Moisture: ≤0.3%
Application Scenarios
‑ Solvent‑borne decorative & industrial alkyd paints, varnishes and enamels ‑ Water‑reducible waterborne alkyd architectural paints and protective topcoats ‑ Long‑oil & medium‑oil oxidative‑cure alkyd formulations covering solvent‑based and water‑based lines ‑ Paint factories expecting one‑drier solution to simplify multi‑system drier stocking ‑ APEO‑restricted coating projects for both solvent‑borne and water‑borne alkyd ‑ Auxiliary through‑drying co‑drier cooperating with cobalt or manganese primary driers
Usage Recommendation
‑ Typical dosage: 0.10%‑0.40% calculated on total paint weight ‑ For solvent‑borne system: add under normal stirring during paint letdown stage ‑ For water‑reducible system: add slowly under low‑speed stirring, avoid high‑shear violent agitation ‑ Do not add during high‑temperature resin synthesis procedure ‑ Must combine with primary drier such as cobalt or manganese, cannot be used alone ‑ Complete pre‑test for drying performance, hardness, gloss and storage stability under respective solvent‑borne and water‑reducible real‑formula conditions ‑ Excessive dosage may trigger gloss fluctuation; strictly control addition amount ‑ Complete full‑set laboratory assessment before mass‑scale production
Package & Storage
‑ Standard package: 25kg / 200kg metal drum ‑ Store in cool, dry and well‑ventilated warehouse, keep away from heat source and direct sunlight ‑ Tightly seal container after opening to prevent solvent volatilization and performance deterioration ‑ Shelf life: 12 months under proper storage conditions
Safety Notes
‑ Combustible liquid, keep away from all ignition sources. ‑ Avoid skin contact and eye splash. Wear chemical‑resistant gloves and safety goggles during handling. ‑ Avoid inhalation of vapor and mist, ensure effective local ventilation. ‑ Refer to SDS for full guidance on handling, transportation and emergency disposal.
Previous : Water‑Dispersible Manganese Drier 6% Mn CAS 27253-32-3 Through Drier for Water Alkyd
Next : Waterborne Co‑Mn‑Zr Universal Drier for Oxidative Water Resin System
Copy product links
Long by picture save/share
Add Successfully
Add Successfully
Jishengya Technology
Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.
点击右上角
分享给朋友吧
Copyright © 2005-2026 Shenzhen Jishengya Technology Co., Ltd. All Rights Reserved.
