Dental Base Plate and Inlay Pattern Wax Dental Laboratory Modeling Wax (Shur Wax Equivalent)
Dental Base Plate and Inlay Pattern Wax is a professional laboratory modelling wax formulated as a direct alternative to Shur Wax. It demonstrates balanced hardness, favourable carving performance and proper thermal plasticity. The wax can be shaped manually or by carving tools for denture base plates, inlays and crown wax patterns. It offers stable dimensional behaviour after cooling, serving as a reliable modelling material for dental laboratory technicians during prosthetic restoration fabric
Product Overview Dental Base Plate and Inlay Pattern Wax (Shur Wax Equivalent) is a specialty blended modelling wax designed for dental laboratory applications. Its tailored thermoplastic property allows convenient softening under moderate heat. After cooling, the wax maintains firm shape with minimal distortion. Dental technicians can carve, trim and contour the wax to build wax patterns for denture base plates, dental inlays, onlays and crown restorations. When the finished wax model is invested and burnt‑out, low ash residue helps to reduce casting defects for dental alloy restorations. Consistent physical performance supports daily routine production in dental laboratories.
Key Features ‑ Formulated as Shur Wax replacement for dental lab modelling procedures ‑ Balanced hardness, easy carving, trimming and contouring by hand and lab instruments ‑ Suitable thermal plasticity, softens readily upon gentle heating ‑ Low tendency of warpage and deformation after cooling and solidification ‑ Low ash content after burnout, reduces flaws for dental alloy casting
Typical Technical Properties ‑ Chemical Type: Blended dental laboratory modelling wax ‑ Appearance: Solid wax sheets / wax blocks ‑ Melting‑Softening Range: Refer to TDS ‑ Hardness: Refer to TDS ‑ Ash Content: Refer to TDS
Applications ‑ Dental laboratory: Wax pattern fabrication for inlay, onlay and crown restorations ‑ Denture processing: Modelling and forming of denture base plate wax frameworks ‑ Orthodontic laboratory: Auxiliary wax modelling for trial denture setup ‑ Dental education: Practical training material for dental technical schools
Processing Recommendation Soften the wax with controlled moderate heating; avoid excessive over‑heating that causes wax flow and deformation. Perform carving and shaping once the material reaches a suitable workable temperature. After finishing the wax pattern, proceed promptly with investing. It is advised to conduct in‑lab testing before regular adoption in mass dental prosthetic production.
Storage & Handling Store in a stable‑temperature dry cabinet, avoid extreme temperature swings to prevent warping. Keep away from direct heat sources. Reseal packaging after opening. Wear suitable gloves when handling solid dental modelling wax.
Previous : Jewelry Lost Wax Investment Casting Pattern Wax BlueCast X5 Equivalent
Next : SLA UV-Curable Castable Wax for 3D Printing Jewelry Lost Wax Patterns (Cast 40 Equivalent)
Copy product links
Long by picture save/share
Add Successfully
Add Successfully
Jishengya Technology
Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.
点击右上角
分享给朋友吧
Copyright © 2005-2026 Shenzhen Jishengya Technology Co., Ltd. All Rights Reserved.
