Low Melting Point Depilatory Hard Wax Base for Personal Care Wax Formulation
Low Melting Point Depilatory Hard Wax Base is a cosmetic‑grade hard wax base designed for depilatory wax formulation. With a relatively low melting point, it can be melted at mild heating temperature. It provides favorable ductility and excellent hair‑gripping capacity after cooling and solidifying. The wax base is suitable for manufacturing salon‑grade hard depilatory wax for professional personal‑care hair‑removal applications.
Product Overview Low Melting Point Depilatory Hard Wax Base is a blended cosmetic wax base intended for depilatory hard‑wax production. The specially adjusted melting range allows gentle melting without excessive high‑temperature heating. When formulated with essential oils, colourants and other cosmetic additives, the finished depilatory wax can be applied directly onto skin. After cooling, the solidified wax strip forms firm adhesion to body hairs, enabling effective hair removal without using fabric strips. This wax base delivers stable physical properties for serial manufacturing of salon and home‑use depilatory wax products.
Key Features ‑ Low melting‑point formula for mild heating during melting process ‑ Excellent ductility after solidification, reduces brittle cracking upon peeling ‑ Strong hair‑gripping performance for efficient body and facial hair removal ‑ Good compatibility with cosmetic colourants, fragrances and skin‑care additives ‑ Consistent base properties for stable mass production of depilatory wax
Typical Technical Properties ‑ Chemical Type: Blended cosmetic depilatory hard‑wax base ‑ Appearance: Solid amber‑coloured blocks or pastilles ‑ Melting Range: Refer to TDS ‑ Penetration: Refer to TDS ‑ Drop Point: Refer to TDS
Applications ‑ Salon depilatory product: Raw base for professional salon hard hair‑removal wax ‑ Home personal‑care: Formulation ingredient for consumer‑grade depilatory wax blocks ‑ Cosmetic manufacturing: Base material for custom‑formulated depilatory wax recipes ‑ Spa product development: Formulation of aromatherapy‑infused hair‑removal wax
Processing Recommendation Melt the wax base under moderate heating. Add fragrance, pigment and skin‑friendly additives with gentle stirring once fully molten. Avoid over‑heating to prevent discoloration and thermal degradation. Complete small‑batch formulation trials prior to large‑scale cosmetic production.
Storage & Handling Store in cool, dry warehouse away from direct sunlight. Prevent sustained high‑temperature storage which may cause block agglomeration. Reseal packaging after opening. Wear protective gloves during handling solid wax.
Previous : Injectable Jewelry Pattern Wax for Lost Wax Injection Molding (Aqua Wax Equivalent)
Next : High Hardness Stick Product Wax Base Gloss and Stability Additive (TOWAX-4F4 Equivalent)
Copy product links
Long by picture save/share
Add Successfully
Add Successfully
Jishengya Technology
Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.
点击右上角
分享给朋友吧
Copyright © 2005-2026 Shenzhen Jishengya Technology Co., Ltd. All Rights Reserved.
