PE‑Carnauba Blend Micronized Wax is a fine micron composite wax blending polyethylene and natural carnauba wax, developed as direct drop‑in replacement for CERETAN MCX 6610. The synergistic combination of synthetic polyolefin and natural carnauba wax achieves outstanding surface‑slip performance without obvious loss of film gloss. It effectively reduces coefficient of friction for cured ink and coating layers, improves scratch resistance during metal can stamping, stacking and transportation. Th

Product Detail

Product Overview

PE‑Carnauba Blend Micronized Wax (CAS 9002‑88‑4, CERETAN MCX 6610 Equivalent) is a specially compounded micron‑size blended wax based on polyethylene and natural carnauba wax. Carefully controlled blending ratio balances slip enhancement and high‑gloss retention, avoiding excessive matting which is commonly seen with single‑grade polyolefin wax. After being dispersed into can coatings or printing inks, fine wax particles gently migrate towards the coating surface during curing. The formed thin wax layer lowers surface friction, protecting metal‑packaging surfaces from scratches and scuffing during can stamping, stacking and logistics handling. This product serves as a cost‑effective imported substitute for CERETAN MCX 6610 for metal coating and packaging ink manufacturers.

Key Features

Functional equivalent to CERETAN MCX 6610 for imported grade substitution
Composite formula of polyethylene and natural carnauba wax
Delivers excellent surface slip while preserving high film gloss
Reduces scratch and scuff damages during metal can stamping and stacking
Fine micron‑sized powder provides favorable dispersion performance
Suitable for can coating, metal decoration ink and high‑gloss overprint varnish
Good compatibility with many solvent‑based resin systems for metal packaging

Technical Specification

Chemical Name: PE‑Carnauba Blend Micronized Wax
CAS Number: 9002‑88‑4
Appearance: Off‑white fine micron powder
Melting Point: 84‑94℃
Particle Size: Micron‑range fine powder
Equivalent Grade: CERETAN MCX 6610

Application Fields

Interior and exterior protective can coatings for metal food and beverage packaging
Metal‑decorative printing inks for tinplate and aluminum substrates
High‑gloss overprint varnish for rigid packaging
Industrial topcoats requiring both high‑gloss retention and improved surface slip

Usage Recommendation

Typical dosage ranges from 0.2‑2.0 % based on total formulation weight. Add the micronized wax during high‑speed dispersion or sand‑grinding processing. Adequate grinding and dispersion are required to prevent wax agglomerates and surface specks. Pre‑production laboratory trials are strongly recommended to verify gloss level, slip coefficient and coating processing performance.

Storage & Handling

Store sealed sacks in dry, well‑ventilated warehouse. Keep away from direct sunlight and high‑temperature heat sources. Avoid moisture absorption and powder caking. Reseal sacks promptly after partial discharging.

Safety Notice

This PE‑Carnauba blend micronized wax is intended for industrial coating and printing‑ink manufacturing only. It is not designed for direct food contact. Avoid inhalation of fine powder during handling. Wear dust‑proof mask, protective gloves and safety goggles. Please refer to the corresponding MSDS for complete safety operation instructions.

Previous : Halogen-Free Modified Polyolefin Micronized Wax PTFE Alternative CAS 9002-88-4 Abrasion Resistant Ink Coating (CERETAN MX 3110 Equivalent) Next : Linear PE Wax Narrow Carbon Distribution CAS 9002-88-4 Coating Plastic Adhesive Imaging Material (Acculin Xactowax Equivalent)

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

PE-Carnauba Blend Micronized Wax CAS 9002-88-4 High Gloss Slip Can Coating Printing Ink (CERETAN MCX 6610 Equivalent)

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.