Polyethylene Micronized Wax is fine ground polyethylene micronized powder developed as drop‑in replacement for Ceridust 3620. This micron wax powder migrates to coating surface during film curing to form a thin protective wax layer. It effectively improves scratch resistance, abrasion resistance and surface slip performance. The product exhibits good compatibility with resin binders in both solvent‑borne and water‑borne coating formulas. It is widely used for industrial paint systems to enhance

Product Detail

Product Overview

Polyethylene Micronized Wax (CAS 9002‑88‑4, Ceridust 3620 Equivalent) is high‑quality ground polyethylene micronized powder designed for industrial coating applications. After incorporation into coating formulations, fine wax particles float gradually toward the coating surface while solvent or water evaporates during curing. A uniform lubricating wax layer is formed on the top surface of dry film, which greatly enhances scratch resistance, abrasion resistance and anti‑mar performance. It shows satisfactory compatibility with water‑based and solvent‑borne resin systems including acrylic, polyurethane and alkyd resins. This grade serves as a cost‑effective imported alternative to Ceridust 3620 for paint manufacturers.

Key Features

Direct functional equivalent to Ceridust 3620 for imported grade substitution
Fine micron‑sized ground polyethylene powder with controllable particle distribution
Remarkable improvement on scratch‑resistance, mar‑resistance and surface slip of dry coating film
Suitable for both solvent‑borne and waterborne industrial coating systems
Good wetting and compatibility with a broad range of coating resin binders
Stable thermal property during paint grinding and dispersion processing
Versatile surface‑modifying wax additive for decorative and protective coatings

Technical Specification

Chemical Name: Polyethylene Micronized Wax
CAS Number: 9002‑88‑4
Appearance: White fine powder
Melting Point: 124‑130℃
Particle Size: Custom micron‑range
Equivalent Grade: Ceridust 3620

Application Fields

Solvent‑based industrial protective and decorative coatings
Water‑based industrial and architectural coatings
Wood coatings to improve surface scratch‑resistance
General primer and topcoat formulations requiring surface slip modification

Usage Recommendation

Typical dosage ranges from 0.3‑3.0 % based on total coating formulation weight. Add the micronized wax powder during high‑speed dispersion or grinding stage. Sufficient dispersion is required to avoid coarse particles and surface defects on finished coating. Compatibility and performance testing in your target formula is strongly advised before mass production.

Storage & Handling

Store sealed sacks in a dry, well‑ventilated warehouse. Keep away from direct sunlight and high‑temperature heat sources. Prevent moisture absorption. Control static electricity during powder handling. Reseal sacks promptly after partial use.

Safety Notice

This micronized wax powder is intended exclusively for industrial coating formulation, not for food or cosmetic applications. Avoid inhalation of fine dust. Wear dust‑proof mask, safety goggles and protective gloves during operation. Please refer to the corresponding MSDS for detailed safety instructions.

Previous : EVA-Modified PE Wax CAS 24937-78-8 Lubricant Release Agent PVC Paint Floor Polish (EVA3 Equivalent) Next : Modified PE Micronized Wax CAS 9002-88-4 Can Coating 3C Coating Strength Additive (Ceridust 3920 F Equivalent)

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Polyethylene Micronized Wax CAS 9002-88-4 Scratch Resistant Powder Solvent Waterborne Coating (Ceridust 3620 Equivalent)

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.