Refined Petroleum Microcrystalline Wax High Melting Point CAS 63231-60-7 Ink Coating Adhesive Industrial Formulation (Paracera H Equivalent)
Refined Petroleum Microcrystalline Wax is high‑melting‑point fully‑refined petroleum microcrystalline wax developed as direct drop‑in replacement for Paracera H. It features fine crystal structure, low oil content and excellent thermal stability. Within ink and coating formulations, it improves surface slip, scratch‑resistance and anti‑blocking performance. For hot‑melt adhesive systems, it regulates melt viscosity, adjusts setting speed and enhances adhesive cohesion. This wax exhibits good com
Product Overview
Refined Petroleum Microcrystalline Wax (CAS 63231‑60‑7, Paracera H Equivalent) is highly refined petroleum‑derived microcrystalline wax with compact fine crystal structure. Strict refining process reduces residual oil content and improves high‑temperature resistance. When incorporated into industrial ink and coating, the wax migrates to the surface after film formation, delivering anti‑blocking, slip and scratch‑resistant properties. In hot‑melt adhesive production, it effectively modulates melt viscosity, balances open‑time and solidification rate, and reinforces internal cohesive strength of adhesive. It also works as a conditioning component for diverse specialty industrial formulations. This grade acts as a cost‑effective imported substitute for Paracera H for ink, coating and adhesive manufacturers.
Key Features
- Functional equivalent to Paracera H for imported‑grade substitution
- Highly‑refined petroleum microcrystalline structure with low residual oil content
- Excellent thermal stability and relatively narrow melting range
- Improves slip, scratch‑resistance and anti‑blocking performance for ink and coating
- Regulates melt viscosity and setting speed for hot‑melt adhesive systems
- Enhances cohesive strength of hot‑melt adhesives
- Good compatibility with hydrocarbon resins, tackifiers and polyolefin polymers
Technical Specification
- Chemical Name: Refined Petroleum Microcrystalline Wax
- CAS Number: 63231‑60‑7
- Appearance: Off‑white solid lumps or pellets
- Melting Point: 87‑94℃
- Equivalent Grade: Paracera H
Application Fields
- Industrial printing ink, anti‑scuff additive for solvent‑based ink system
- Industrial protective coating formulation for anti‑blocking modification
- Hot‑melt adhesive raw material for packaging and assembly adhesives
- General‑purpose specialty industrial wax‑based formulations
Usage Recommendation
For ink and coating formulations, typical dosage ranges 1.0‑3.5 % of total formulation weight. For hot‑melt adhesive systems, recommended addition is 6‑18 %. Feed the wax together with resins and tackifiers under high‑temperature melting and mixing. It is strongly recommended to conduct laboratory trials before mass‑scale production to verify melt behaviour, setting speed and finished‑product performance.
Storage & Handling
Store sealed sacks in dry, well‑ventilated warehouse. Keep away from direct sunlight and heat sources. Avoid overheating. Reseal sacks promptly after partial discharging.
Safety Notice
This refined petroleum microcrystalline wax is for industrial manufacturing only, not for food or cosmetic applications. Wear protective gloves and safety goggles during material handling. Please refer to the corresponding MSDS for complete safety operation instructions.
Copy product links
Long by picture save/share
Add Successfully
Refined Petroleum Microcrystalline Wax High Melting Point CAS 63231-60-7 Ink Coating Adhesive Industrial Formulation (Paracera H Equivalent)
Add Successfully
Jishengya Technology
Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.
点击右上角
分享给朋友吧
Copyright © 2005-2026 Shenzhen Jishengya Technology Co., Ltd. All Rights Reserved.
