Qrcode
WhatsApp
jsya@jitian168.com
+86 137 1195 5390
TOP

Zirconium Octoate 6% Zr CAS 22464-99-9 Lead‑Free Through Drier for Alkyd Coating

Zirconium Octoate 6% Zr CAS 22464‑99‑9 is oil‑soluble lead‑free zirconium‑based auxiliary drier with 6% zirconium metal content. As a safe replacement for traditional lead‑containing driers, it cooperates with cobalt and manganese driers to boost through‑drying performance of alkyd coatings. It improves paint film hardness, gloss and water resistance, features good resin compatibility, and is widely adopted for manufacturing environment‑friendly solvent‑borne alkyd paints.

Product Overview

Zirconium Octoate 6% Zr CAS 22464‑99‑9 is zirconium 2‑ethylhexanoate serving as lead‑free auxiliary through drier for oxidative alkyd coatings. It does not act as surface drier independently, but delivers outstanding synergistic effect when compounded with cobalt and manganese driers. It accelerates inner‑layer cross‑linking reaction, upgrades film hardness, gloss and anti‑water property, and replaces toxic lead drier for compliant paint formulas. It dissolves well in aliphatic, aromatic solvents and diverse alkyd resins, and maintains stable catalytic performance during storage and industrial production.

Key Features

‑ 6% zirconium content, reliable auxiliary through‑drying performance ‑ 100% lead‑free formulation, meets environmental‑friendly coating requirements ‑ Excellent synergistic effect with cobalt and manganese drier systems ‑ Improves coating film hardness, surface gloss and water resistance ‑ Reduces risk of surface wrinkling and skinning for alkyd systems ‑ Good miscibility with long‑oil, medium‑oil and short‑oil alkyd resins ‑ Stable drier activity under normal storage conditions ‑ Consistent batch‑to‑batch quality for large‑scale alkyd paint manufacturing

Technical Specifications

‑ Product Name: Zirconium Octoate (Zirconium 2‑Ethylhexanoate) ‑ Zirconium Content: 6% Zr ‑ CAS No.: 22464‑99‑9 ‑ Appearance: Pale yellow transparent liquid ‑ Solubility: Soluble in mineral spirits, xylene and alkyd resins ‑ Density: 0.92‑1.02 g/cm³ @25℃ ‑ Viscosity: Low‑viscosity liquid ‑ Flash Point: ≥60℃ ‑ Moisture: ≤0.2%

Application Scenarios

‑ Lead‑free air‑drying alkyd coatings, matched with cobalt‑manganese drier ‑ Alkyd enamel, decorative varnish and furniture finishing paint ‑ Solvent‑borne anti‑rust protective alkyd coatings ‑ Medium‑oil and long‑oil general‑purpose industrial alkyd paint ‑ Composite drier system to substitute traditional lead‑based driers

Usage Recommendation

‑ Typical dosage: 0.1%‑0.5% calculated on total paint weight (as metal zirconium) ‑ Premix with cobalt, manganese and other drier components before adding into coating formula ‑ Do not add during high‑temperature resin synthesis procedure ‑ Adjust drier proportion according to drying test and film performance feedback ‑ Not suitable for single‑component use without cobalt‑manganese driers ‑ Complete laboratory evaluation on drying property, hardness and gloss before mass‑scale production

Package & Storage

‑ Standard package: 25kg / 200kg metal drum ‑ Store in cool, dry and well‑ventilated warehouse, keep away from heat source and open flame ‑ Tightly seal container after opening to prevent solvent volatilization and performance degradation ‑ Shelf life: 12 months under proper storage conditions

Safety Notes

‑ Combustible liquid, keep away from all ignition sources. ‑ Avoid skin contact and eye splash. Wear chemical‑resistant gloves and safety goggles during handling. ‑ Avoid inhalation of vapor and mist, ensure effective local ventilation. ‑ Refer to SDS for full guidance on handling, transportation and emergency disposal.


Zirconium Octoate 6% Zr CAS 22464-99-9 Lead‑Free Through Drier for Alkyd Coating
Zirconium Octoate 6% Zr CAS 22464‑99‑9 is oil‑soluble lead‑free zirconium‑based auxiliary drier with 6% zirconium metal content. As a safe replacement for traditional lead‑containing driers, it cooperates with cobalt and manganese driers to boost through‑drying performance of alkyd coatings. It improves paint film hardness, gloss and water resistance, features good resin compatibility, and is widely adopted for manufacturing environment‑friendly solvent‑borne alkyd paints.
Long press to look detail
Long by picture save/share
Add Successfully

Zirconium Octoate 6% Zr CAS 22464-99-9 Lead‑Free Through Drier for Alkyd Coating

enquiry
Add Successfully

  Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.


Copyright © 2005-2026 Shenzhen Jishengya Technology Co., Ltd. All Rights Reserved. 

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.