Fine Particle High‑Gloss HDPE Wax Emulsion 35% is a fine‑particle aqueous HDPE wax dispersion developed as direct replacement for JONCRYL Wax 26. The refined small wax particle size helps retain high surface gloss instead of causing matting effect. It effectively enhances rub‑resistance, scratch resistance and surface slip performance for water‑based ink, overprint varnish and packaging coatings. This emulsion shows outstanding compatibility with water‑based acrylic resins and provides stable di

Product Detail

Product Overview

Fine Particle High‑Gloss HDPE Wax Emulsion 35% (CAS 9002‑88‑4, JONCRYL Wax 26 Equivalent) is non‑ionic high‑density polyethylene wax emulsion with finely controlled particle dimension. Unlike conventional coarse wax emulsions that tend to reduce film gloss, this fine‑particle grade maintains high gloss of the finished coating and ink film whilst delivering slip and abrasion‑resistant modification. It is a premium wax additive for packaging printing, widely used in water‑based inks and overprint varnish for food and industrial packaging.

Key Features

Functional equivalent to JONCRYL Wax 26 for cost‑effective substitution
35% solid content, ready‑for‑processing aqueous emulsion
Fine controlled particle size, preserving high gloss without obvious matting
Remarkable improvement on rub‑resistance, scratch resistance and surface slip
Excellent compatibility with water‑based acrylic resin systems
Low tendency for sedimentation under proper storage
Optimized for packaging printing ink and overprint varnish formulations

Technical Specification

Chemical Name: Fine Particle High‑Gloss HDPE Wax Emulsion
CAS Number: 9002‑88‑4
Solid Content: 35%
Ionic Character: Non‑ionic
Appearance: Milky white homogeneous liquid
pH Value: 7.0‑9.0
Equivalent Grade: JONCRYL Wax 26

Application Fields

Water‑based printing ink for flexible packaging: improve rub resistance without losing gloss
Waterborne overprint varnish: deliver smooth slip and protect printed packaging surface
Packaging surface coatings: enhance scratch resistance for paper and cardboard packaging
Decorative water‑based topcoats where high gloss and abrasion resistance are required

Usage Recommendation

Recommended dosage ranges from 1.0‑5.0 % calculated on total formulation weight. Add the wax emulsion under gentle stirring during the letdown stage. Severe high‑speed shearing should be avoided after addition to prevent emulsion destabilization. Always perform compatibility and gloss verification trials in target formulations before formal mass production.

Storage & Handling

Keep containers tightly sealed, store in cool and dry warehouse within 5‑30℃. Protect the product from freezing and direct intense sunlight. Avoid prolonged storage under high temperature. Gentle slow agitation is acceptable if slight sedimentation appears after long‑time storage.

Safety Notice

This industrial wax emulsion is for industrial formulation only, not suitable for direct food contact unless full compliance testing is completed. Use protective gloves and goggles during material handling. Please consult the corresponding MSDS for detailed safety operation instructions.

Previous : Soft Oxidized PE Wax Emulsion 35% CAS 68441-17-8 Textile Finishing Water Ink Varnish Adhesive (Poligen WE7 Equivalent) Next : Large Particle PE-Paraffin Wax Emulsion 35% CAS 9002-88-4 Abrasion Resistant Water-Based Ink Packaging Coating (JONCRYL Wax 28 Equivalent)

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Fine Particle High-Gloss HDPE Wax Emulsion 35% CAS 9002-88-4 Water-Based Ink Overprint Varnish Packaging (JONCRYL Wax 26 Equivalent)

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.