Large Particle PE‑Paraffin Wax Emulsion 35% is a non‑ionic blended polyethylene‑paraffin wax emulsion formulated as a drop‑in replacement for JONCRYL Wax 28. The comparatively large wax particles migrate to the surface during film formation and establish a durable protective wax layer. It greatly improves rub‑resistance, scratch‑proof and anti‑scuff performance of water‑based ink and packaging coatings. This emulsion shows good compatibility with common water‑based acrylic resins and maintains s

Product Detail

Product Overview

Large Particle PE‑Paraffin Wax Emulsion 35% (CAS 9002‑88‑4, JONCRYL Wax 28 Equivalent) is a non‑ionic aqueous dispersion based on polyethylene and paraffin wax blend. Thanks to its controlled large‑particle distribution, wax particles easily float to the coating surface while water evaporates during curing. It creates a tough slip‑resistant surface barrier. Unlike fine‑particle wax emulsions that preserve high gloss, this grade brings noticeable matting effect while providing outstanding abrasion resistance. It is widely adopted within paper carton printing, flexible packaging and industrial water‑based coating sectors as a cost‑saving alternative to imported wax additives.

Key Features

Drop‑in functional equivalent to JONCRYL Wax 28 for imported grade replacement
35% solid content, ready‑to‑use liquid emulsion without pre‑melting
Large wax particle distribution builds robust surface protection against rubbing and scuffing
Delivers obvious anti‑abrasion performance for printed cartons during stacking and transportation
Acceptable moderate matting property for matte and semi‑gloss packaging finishes
Good compatibility with acrylic, styrene‑acrylic water‑based resin systems
Satisfactory storage stability under proper warehouse conditions

Technical Specification

Chemical Name: Large Particle PE‑Paraffin Wax Emulsion
CAS Number: 9002‑88‑4
Solid Content: 35%
Ionic Character: Non‑ionic
Appearance: Milky white homogeneous liquid
pH Value: 7.0‑9.0
Equivalent Grade: JONCRYL Wax 28

Application Fields

Water‑based printing ink for carton and paper packaging: enhance rub‑resistance
Flexible packaging water‑based coatings: reduce surface scuffing during handling
Matte & semi‑matte water‑based overprint varnish for packaging
Industrial water‑based topcoats requiring high abrasion‑resistant surface

Usage Recommendation

Suggested dosage is 1.0‑6.0 % by weight of the total formulation. Add slowly under moderate stirring in the letdown stage after grinding is completed. Avoid intensive high‑speed shearing, which may trigger coagulation and emulsion destabilization. Pre‑formulation compatibility and performance testing on your target system is strongly recommended prior to mass production.

Storage & Handling

Keep containers tightly sealed. Store within 5‑30℃ in a cool, dry warehouse. Prevent freezing and direct strong sunlight. Prolonged hot storage should be avoided. Gentle slow stirring is allowed if minor sedimentation occurs after long‑term storage.

Safety Notice

This product is an industrial wax emulsion for formulation only. It is not suitable for direct food contact unless complete relevant compliance testing has been performed. Wear safety goggles and protective gloves during handling. Please refer to the corresponding MSDS for full safety operating instructions.

Previous : Fine Particle High-Gloss HDPE Wax Emulsion 35% CAS 9002-88-4 Water-Based Ink Overprint Varnish Packaging (JONCRYL Wax 26 Equivalent) Next : Paraffin-PE Blend Wax Emulsion CAS 8002-74-2 Overprint Varnish Industrial Functional Packaging Coating (JONCRYL Wax 120 Equivalent)

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Large Particle PE-Paraffin Wax Emulsion 35% CAS 9002-88-4 Abrasion Resistant Water-Based Ink Packaging Coating (JONCRYL Wax 28 Equivalent)

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.