Grease Grade Organo Bentonite BARAGEL Equivalent (CAS 68953‑58‑2) is special grease‑grade surface‑modified organophilic bentonite powder designed as direct alternative to BARAGEL, mainly applied for lithium‑complex lubricating grease manufacturing. Under high‑temperature shearing together with suitable polar activator, clay platelets are fully exfoliated to build stable three‑dimensional colloidal gel network within base oil. The network thickens mineral or synthetic base oil into consistent gre

Product Detail

Product Overview

Grease Grade Organo Bentonite BARAGEL Equivalent, CAS 68953‑58‑2, is manufactured from purified natural montmorillonite clay via rigorous organic quaternary‑ammonium salt modification, serving as premium performance replacement for BARAGEL grease‑grade bentonite thickener. This product is specially optimized for lithium‑complex lubricating grease formulation in industrial and automotive lubricant plants. Unlike coating‑grade organo bentonite, this grease‑specific grade requires matched polar activator together with high‑temperature intensive shearing processing to achieve complete exfoliation of silicate platelets. Exfoliated clay platelets construct stable three‑dimensional colloidal gel network inside mineral or synthetic base‑oil medium. The colloidal network restricts free flow of base oil and forms homogeneous grease texture. During service, the network resists oil separation and bleeding at elevated operating temperature. It maintains stable grease consistency after repeated mechanical shearing inside rolling bearings and sliding friction assemblies. This organoclay demonstrates good compatibility with anti‑oxidants, anti‑wear and extreme‑pressure additives, without undesired interference on finished‑grease performance. It features consistent batch‑to‑batch quality to support continuous large‑scale lubricating‑grease production.

Key Features

‑ Grease‑grade organophilic bentonite, functional equivalent to BARAGEL for lithium‑complex lubricating grease ‑ Requires proper polar activator and high‑temperature high‑shear processing to realize full clay‑platelet exfoliation ‑ High thickening efficiency for different mineral and synthetic base oils, helps to obtain desired grease NLGI consistency grades ‑ Excellent resistance against oil‑bleeding at high working temperature, reduces oil separation of finished grease ‑ Superior mechanical shear stability, maintains uniform grease texture after repeated kneading and friction‑cycle operation ‑ Good compatibility with standard grease additives including antioxidant, anti‑wear and EP extreme‑pressure additives ‑ Fine free‑flowing off‑white powder, convenient for feeding in grease‑making reactors ‑ Reliable batch‑to‑batch consistency for mass‑production of industrial and automotive lithium‑complex lubricating greases

Technical Specifications

‑ Product Name: Grease Grade Organo Bentonite BARAGEL Equivalent ‑ CAS Number: 68953‑58‑2 ‑ Appearance: Light off‑white fine powder ‑ Moisture: ≤3.5 % ‑ Loss on ignition: 34.0‑42.0 % ‑ Fineness (325 mesh residue): ≤2.0 % ‑ Bulk density: 0.23‑0.34 g/cm³

Application Scenarios

‑ Lithium‑complex high‑temperature bearing lubricating grease for industrial machinery ‑ Automotive chassis and wheel‑hub multi‑purpose lithium‑complex greases ‑ Heavy‑duty equipment lubricating greases working under elevated temperature conditions ‑ Bentonite‑based high‑temperature specialty greases with mineral or synthetic base oils ‑ Mineral thickening agent for commercial grease manufacturing plants

Usage Recommendation

‑ Typical dosage range: 6.0‑14.0 % based on total grease formulation weight ‑ Add organo bentonite powder into heated base oil, introduce matched polar activator, then proceed with high‑temperature intensive shearing to complete exfoliation and gel formation ‑ Sufficient high‑temperature shearing together with correct activator dosage is essential to reach target grease consistency; insufficient processing will lead to poor thickening and severe oil‑bleeding ‑ Run complete laboratory pre‑batch testing covering penetration, dropping‑point, oil separation and shear stability before formal mass‑scale grease production ‑ Adjust loading dosage according to target NLGI grade and base‑oil viscosity; excessive addition may cause overly stiff grease and poor pump‑ability

Package & Storage

‑ Standard packing: 25kg kraft paper bag with inner PE liner ‑ Store in cool, dry and ventilated warehouse; protect powder from moisture absorption and heavy compression ‑ Tightly seal opened bags to prevent moisture ingress ‑ Shelf life: 12 months under proper storage conditions

Safety Notes

‑ Avoid dust generation and inhalation during material handling; wear suitable dust mask and safety goggles. ‑ Prevent direct skin contact; chemical‑resistant protective gloves are required for operation. ‑ Keep away from open flame and high‑temperature heat sources. ‑ Please refer to SDS document for comprehensive guidance on handling, transportation and emergency disposal.

Previous : GARAMITE‑1210 Equivalent Organoclay CAS 68953‑58‑2 Rheology Modifier for Adhesive Sealant Thick‑Film Coatings Next : Oil‑Base Drilling Fluid Organoclay CAS 68953‑58‑2 Organophilic Bentonite for Diesel Mineral Oil Drilling Mud Viscosifier

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Grease Grade Organo Bentonite BARAGEL Equivalent CAS 68953‑58‑2 Thickening Agent for Lithium Complex Lubricating Grease

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.