High‑Solids PE Wax Dispersion 65% is a high‑concentration non‑ionic polyethylene wax dispersion developed as direct replacement for Lanco Glidd 6735. Thanks to its 65% high‑solid content, it lowers transportation and storage expenses for formulators. The dispersed polyethylene wax particles provide matting effect together with enhanced scratch resistance and slip property. This wax dispersion fits well within water‑based paint and waterborne ink formulations and shows good compatibility with acr

Product Detail

Product Overview

High‑Solids PE Wax Dispersion 65% (CAS 9002‑88‑4, Lanco Glidd 6735 Equivalent) is a high‑solids non‑ionic aqueous polyethylene wax dispersion. Different from conventional 35% wax emulsions, this product features 65% non‑volatile content, which helps to minimize water introduction into finished formulations. During film formation, fine wax particles migrate to the coating surface and build up micro‑roughness to deliver controlled matting performance. Meanwhile, it upgrades scratch resistance, abrasion resistance and surface slip of dry films. It serves as a cost‑effective imported substitute for water‑based industrial paints and printing inks.

Key Features

Functional equivalent to Lanco Glidd 6735 for imported grade substitution
65% high‑solid content, reduces water dilution for your formulations
Acts as internal matting agent to create controlled matte and satin surface
Improves scratch resistance, abrasion resistance and surface slip of dry film
Good compatibility with water‑based acrylic and polyurethane resin systems
Less shipping cost due to high concentration, favorable for large‑batch usage
Uniform dispersion with acceptable anti‑sedimentation performance under proper storage

Technical Specification

Chemical Name: High‑Solids PE Wax Dispersion
CAS Number: 9002‑88‑4
Solid Content: 65%
Ionic Character: Non‑ionic
Appearance: Milky white viscous liquid
pH Value: 7.0‑9.0
Equivalent Grade: Lanco Glidd 6735

Application Fields

Water‑based industrial matte and satin paints for metal, wood and plastic substrates
Waterborne printing inks requiring matte surface and improved rub‑resistance
Water‑based overprint varnish for satin‑finish packaging
Functional aqueous topcoats where both matting and abrasion resistance are required

Usage Recommendation

Recommended dosage ranges from 1.5‑7.0 % based on total formulation weight. Add slowly under moderate stirring during the letdown stage. Intense high‑speed shearing should be avoided, which may cause coagulation. Pre‑tests on matting degree, compatibility and film performance in your target formula are strongly recommended prior to mass manufacturing.

Storage & Handling

Store tightly sealed containers in a cool, dry warehouse within 5‑30℃. Prevent freezing and direct strong sunlight exposure. Avoid prolonged high‑temperature storage. Gentle slow stirring is allowed if slight sedimentation appears after long‑term storage.

Safety Notice

This industrial wax dispersion is intended only for industrial formulation. It is not suitable for direct food contact unless relevant compliance testing has been completed. Wear protective gloves and safety goggles during handling. Please refer to the corresponding MSDS for complete safety operating instructions.

Previous : Polypropylene Wax Emulsion Fine Dispersion CAS 9003-07-0 Anti-Blocking Mar Resistant OEM Industrial Coating (Aquaslip 662 Equivalent) Next : Bio-Based Sugarcane Wax Emulsion Waterborne Polish Coating Ink Seed Coating (DEUREX X 5201 W Equivalent)

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

High-Solids PE Wax Dispersion 65% CAS 9002-88-4 Matting Agent Waterborne Paint Ink (Lanco Glidd 6735 Equivalent)

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.