Low MW PE Homopolymer Wax CAS 9002-88-4 PVC External Lubricant Release Agent Transparency (A-C 6A Equivalent)
Low MW PE Homopolymer Wax is non‑oxidized low‑molecular‑weight polyethylene homopolymer wax developed as direct drop‑in replacement for A‑C 6A. It delivers outstanding external lubricating effect for transparent PVC compounds. This wax reduces adhesion between molten PVC and metal processing surfaces without impairing the transparency of finished PVC articles. It lowers extrusion torque, suppresses frictional heat, and improves mold‑release performance during calendaring, extrusion and injection
Product Overview
Low MW PE Homopolymer Wax (CAS 9002‑88‑4, A‑C 6A Equivalent) is synthetic non‑polar low‑molecular‑weight polyethylene homopolymer wax. Unlike oxidized wax grades, this unmodified homopolymer wax minimizes adverse influence on resin transparency. When incorporated into transparent PVC formulations, it forms a thin lubricating layer at the interface between molten polymer and equipment metal surfaces. It effectively decreases melt sticking, facilitates mold release and lowers processing friction and heat build‑up. It helps to avoid haze and cloudiness issues which often appear in transparent PVC products caused by improper lubricant selection. It serves as a cost‑effective imported substitute for A‑C 6A for transparent PVC compound manufacturers.
Key Features
- Functional equivalent to A‑C 6A for imported grade substitution
- Non‑oxidized PE homopolymer structure, low impact on PVC transparency
- High‑performance external lubricant and release agent for clear rigid‑PVC
- Reduces extrusion and calendering torque, lowers frictional heat during processing
- Good thermal stability under conventional PVC processing temperatures
- Compatible with calcium‑zinc and tin‑based PVC heat stabilizer systems
- Helps to deliver glossy, low‑haze surface for transparent PVC finished goods
Technical Specification
- Chemical Name: Low MW PE Homopolymer Wax
- CAS Number: 9002‑88‑4
- Appearance: White hard pellets
- Melting Point: 104‑112℃
- Equivalent Grade: A‑C 6A
Application Fields
- Transparent rigid‑PVC calendered sheets and blister‑grade films
- Clear PVC extruded profiles and transparent hard tubing
- Transparent PVC injection‑molded technical fittings
- Rigid‑PVC formulations requiring strict control of haze and surface gloss
Usage Recommendation
Typical dosage ranges from 0.1‑1.2 % based on total PVC formulation weight. Add this wax during the high‑speed hot‑mixing stage together with PVC resin, stabilizers and other additives. Over‑dosage may result in surface blooming and reduced transparency. It is strongly recommended to perform lab compounding trials to optimize addition amount before mass‑scale production.
Storage & Handling
Store sealed sacks in dry, well‑ventilated warehouse. Keep away from direct sunlight and high‑temperature heat sources. Prevent moisture contamination. Reseal sacks immediately after partial discharging.
Safety Notice
This low MW PE homopolymer wax is for industrial PVC compounding only, not for food or cosmetic applications. Wear protective gloves and safety goggles during material handling. Please refer to the corresponding MSDS for complete safety operation instructions.
Previous : PE Processing Wax CAS 9002-88-4 Melt Viscosity Reducer Lubricant for PVC Processing (DEUREX E0 43 P Equivalent)
Next : High Acid Value Oxidized HDPE Wax Powder CAS 68441-17-8 Self-Emulsifying Waterborne Ink Textile Additive (A-C 316A Equivalent)
Copy product links
Long by picture save/share
Add Successfully
Low MW PE Homopolymer Wax CAS 9002-88-4 PVC External Lubricant Release Agent Transparency (A-C 6A Equivalent)
Add Successfully
Jishengya Technology
Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.
点击右上角
分享给朋友吧
Copyright © 2005-2026 Shenzhen Jishengya Technology Co., Ltd. All Rights Reserved.
