Polyethylene Wax Powder is low‑viscosity fine polyethylene wax powder developed as direct drop‑in replacement for Licocene PE 4201. Thanks to its narrow molecular‑weight distribution, this wax delivers excellent lubricating and dispersing properties. It serves as key lubricant inside laser printer toner to improve fusing and anti‑offset performance. Meanwhile, it acts as effective internal and external dispersing‑lubricating additive during plastic compounding and extrusion. It exhibits good the

Product Detail

Product Overview

Polyethylene Wax Powder (CAS 9002‑88‑4, Licocene PE 4201 Equivalent) is synthetic low‑molecular‑weight polyethylene processed into fine free‑flowing powder. Controlled narrow molecular‑weight distribution reduces high‑molecular‑weight fractions that would negatively affect toner fusing behaviour. In laser toner systems, the wax melts during the heat‑fusing procedure, lowering hot‑offset tendency and improving toner release from fuser rollers. For plastic processing, it enhances pigment and filler dispersion while providing balanced internal‑external lubrication during extrusion and compounding. This product provides a cost‑effective alternative to imported Licocene PE 4201 for toner and plastic modification manufacturers.

Key Features

Functional equivalent to Licocene PE 4201 for imported grade substitution
Narrow molecular‑weight distribution, consistent melting behaviour
Excellent lubricating property, effectively reducing hot‑offset for laser toner
Powerful dispersing performance for pigments and fillers within plastic compounding
Balanced internal and external lubrication for thermoplastic processing
Satisfactory thermal stability, low volatile content under processing temperature
Free‑flowing fine powder, convenient for dry‑blending operations

Technical Specification

Chemical Name: Polyethylene Wax Powder
CAS Number: 9002‑88‑4
Appearance: White fine powder
Melting Point: 106‑114℃
Particle Size: Custom micron‑range
Equivalent Grade: Licocene PE 4201

Application Fields

Laser printer & copier toner formulations: anti‑hot‑offset lubricant
Plastic compounding and masterbatch production: pigment and filler dispersant
Thermoplastic extrusion and injection processing: processing lubricant
Modification of polyolefin‑based polymer composites

Usage Recommendation

For toner formulation, typical dosage ranges from 2‑6 % of total toner weight. For plastic masterbatch, recommended addition is 0.3‑2.5 %. For toner production, incorporate during premixing and melt‑kneading stage. For plastic compounding, feed together with resin, pigments and fillers before extrusion. Pre‑trial testing of melting behaviour and dispersion performance is strongly advised before mass production.

Storage & Handling

Store sealed sacks in a dry, well‑ventilated warehouse. Keep away from direct sunlight and heat sources. Avoid moisture absorption. Take anti‑static precautions during powder handling. Reseal sacks immediately after use.

Safety Notice

This polyethylene wax powder is for industrial formulation and polymer processing only, not for food or cosmetic usage. Avoid inhalation of fine dust. Wear dust‑proof mask, safety goggles and protective gloves during handling. Please refer to the corresponding MSDS for complete safety operation instructions.

Previous : Modified PE Micronized Wax CAS 9002-88-4 Abrasion Scratch Resistant Can and 3C Industrial Coating (Ceridust 9610 F Equivalent) Next : Polyethylene Wax Pellets CAS 9002-88-4 PE High-Performance Film Masterbatch Barrier Additive (Licocene PE 5401 Equivalent)

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Polyethylene Wax Powder CAS 9002-88-4 Toner Lubricant Dispersant Plastic Processing (Licocene PE 4201 Equivalent)

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.