Silica‑Coated PP Micronized Wax is a composite micronized wax with polypropylene core and silica surface coating, developed as direct drop‑in replacement for CERETAN MPS 3120. The unique silica‑coated construction delivers synergistic matting and anti‑mar properties within UV‑curable wood coatings. It effectively reduces surface gloss while maintaining good scratch and scuff resistance of cured UV film. The special surface treatment improves dispersion inside UV resin systems and minimizes sedim
Silica‑Coated PP Micronized Wax (CAS 9003‑07‑0, CERETAN MPS 3120 Equivalent) is advanced composite micronized wax featuring a polypropylene core coated with fine silica particles. This special surface modification balances matting efficiency and mar‑resistance for UV‑curable wood coating formulations. When dispersed into UV varnish, the composite wax particles remain stable during storage with reduced settling risk. After UV cross‑linking curing, wax‑silica particles migrate partially to the coating surface to form a delicate micro‑rough surface structure. It achieves desired satin‑matte appearance and significantly improves resistance against scuffing, fingernail marks and walking abrasion on wooden furniture and flooring. This product serves as a cost‑effective imported substitute for CERETAN MPS 3120 for UV wood coating manufacturers.
Typical dosage ranges from 1.0‑3.5 % based on total UV coating formulation weight. Add the silica‑coated micronized wax during high‑speed dispersion stage; intensive sand‑grinding is not required. Adequate stirring is necessary to obtain homogeneous suspension. Pre‑production laboratory trials are strongly recommended to adjust matting degree, evaluate mar‑resistance and test storage stability before mass production.
Store sealed sacks in dry, well‑ventilated warehouse. Keep away from direct sunlight and high‑temperature heat sources. Prevent moisture absorption and powder caking. Reseal sacks promptly after partial discharging.
This silica‑coated PP micronized wax powder is intended exclusively for industrial UV coating manufacturing, not for food or cosmetic applications. Avoid inhalation of fine dust particles. Wear dust‑proof mask, safety goggles and protective gloves during material handling. Please refer to the corresponding MSDS for complete safety operation instructions.

Copy product links
Long by picture save/share

