This solvent‑free quaternary ammonium‑blend antistatic additive is designed exclusively for two‑component epoxy and polyurethane floor and wood coating systems. It contains no volatile organic solvents and fits low‑VOC formulation requirements. The additive disperses uniformly inside resin matrix after mixing with base resin and hardener. It builds a micro‑conductive network within the cured coating film to lower surface resistivity, dissipate static charges and avoid dust attraction on finished

Product Detail

Product DetailsThe quaternary ammonium blend antistatic additive is a solvent‑free functional additive without diluting volatile carriers. It is suitable for high‑solid two‑component coating systems where solvent introduction must be restricted. When preparing coating batches, it should be incorporated into the base resin component before mixing with curing agent. High‑speed gentle stirring is required to achieve homogeneous dispersion; violent long‑time high‑shear agitation should be avoided to prevent potential local destabilization of the quaternary ammonium active substance.

After construction and full cross‑link curing, the additive forms evenly distributed micro‑conductive domains throughout the solid coating layer rather than concentrating only on the top surface. This internal conductive network delivers sustained antistatic performance instead of temporary surface‑only static dissipation. It mitigates common floor‑coating problems caused by static electricity, including dust adhesion on fresh flooring surfaces during commissioning and static discharge risks in workshop floors. For wood coating applications, it helps to reduce static‑induced dust pickup during finishing and subsequent usage of finished wooden components.

It is compatible with standard 2K epoxy amine hardeners as well as aliphatic and aromatic PU isocyanate hardeners. Excessive loading will negatively affect water resistance, solvent resistance and may induce slight surface blooming on the cured film. The typical recommended dosage is 0.4 wt%‑1.5 wt% based on the total weight of complete coating formulation including base and hardener.

Pre‑production laboratory trials are mandatory. Testing items should cover pot‑life examination of mixed coating, curing speed, final film gloss, hardness, chemical resistance, surface resistivity and long‑term ageing stability.

Store in hermetically sealed containers inside cool, dry and ventilated warehouse. Keep storage temperature moderate and avoid overheating. Prevent moisture contamination, because water ingress may trigger undesirable reactions when later used with isocyanate hardener. Reseal containers immediately after partial material discharge.

Previous : Quaternary Ammonium Antistatic Agent Transparent for Water/Solvent Coatings & Printing Ink, Low Dosage High Efficiency No Haze Next : Quaternary Ammonium Antistatic Agent Tallow Trimethyl Ammonium Chloride CAS 8030-78-2, for Solvent Coating & Plastic Internal Additive

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Solvent-Free Coating Antistatic Additive Quaternary Ammonium Blend, for 2K Epoxy/PU Floor & Wood Coating Conductivity Enhancement

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.