This transparent quaternary ammonium antistatic agent is a functional liquid additive designed for coating and printing‑ink systems. It delivers efficient static‑dissipating performance at low addition levels. The additive exhibits good miscibility within both aqueous and solvent‑borne formulations. After film formation, it distributes evenly inside the cured coating or dried ink layer without precipitating to form cloudy haze. It effectively reduces surface resistivity, restrains static charge

Product Detail

Product DetailsThis quaternary ammonium antistatic agent features transparent liquid appearance. Its specially modified molecular structure improves compatibility with polar resin systems, avoiding incompatibility‑induced flocculation during grinding, letdown and storage of coatings and printing inks. Once incorporated into the formulation, the antistatic component disperses homogeneously throughout the liquid system. After coating application and drying or curing, active conductive segments establish a micro‑conductive network inside the solidified film. This network dissipates static charges rapidly and suppresses static‑related issues such as dust pick‑up, static‑triggered surface defects and sheet sticking for printed articles.

Different from many conventional conductive additives that cause whitening, turbidity or haze in clear varnish and transparent ink, this grade maintains excellent film clarity even after long‑term ageing. It adapts to a broad range of resin chemistries including acrylic, polyurethane, polyester and nitrocellulose resins for both water‑borne and solvent‑based production lines. It can be added at the letdown stage under moderate stirring; high‑shear grinding is not mandatory for incorporation.

Due to its high‑efficiency characteristic, the required usage dosage remains low. Over‑dosage should be strictly avoided, otherwise it may negatively impact water‑resistance, solvent‑resistance and surface hardness of cured films. The typical recommended dosage ranges from 0.3 wt%‑1.2 wt% calculated on total formulation weight. Pre‑formulation laboratory testing is necessary to verify storage stability of liquid coating or ink, film transparency, surface resistivity, gloss, water resistance and anti‑yellowing property prior to full‑scale production.

Store the product in tightly sealed containers within a cool, dry and well‑ventilated warehouse. Keep away from direct sunlight and excessive heat. Prevent foreign impurities from entering the liquid. Promptly reseal containers after partial discharging to avoid moisture ingress and maintain consistent product performance for remaining inventory.

Previous : Ethoxylated Fatty Amine Antistatic Agent Liquid CAS 61791-26-2, FDA Food-Contact Transparent for PE PP Film No Printing Impact Next : Solvent-Free Coating Antistatic Additive Quaternary Ammonium Blend, for 2K Epoxy/PU Floor & Wood Coating Conductivity Enhancement

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

Quaternary Ammonium Antistatic Agent Transparent for Water/Solvent Coatings & Printing Ink, Low Dosage High Efficiency No Haze

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.