JSYAPG‑S002 semi‑synthetic CNC cutting fluid is a water‑dilutable metalworking coolant combining refined mineral oil fractions, synthetic surfactants, extreme‑pressure lubricants and high‑efficiency rust inhibitors. After dilution with water, it forms stable translucent micro‑emulsion. This fluid is designed for CNC milling, drilling, turning and tapping operations on carbon steel, alloy steel, cast iron and non‑ferrous metals. It reduces frictional heat at cutting zones, slows down tool wear, a

Product Detail

Product Detail Page: JSYAPG‑S002 semi‑synthetic cutting fluid is manufactured by blending refined base oil, synthetic emulsifiers, sulfur‑phosphorus extreme‑pressure components, anti‑foam agents and rust‑inhibiting substances under controlled mixing conditions. The formulation is optimized to deliver stable micro‑emulsion after proper water dilution. Good emulsion stability resists oil‑water separation during long‑term circulation inside machine sumps. Moderate anti‑foam property suppresses excessive foam generation under high‑flow pumping conditions.

High‑speed CNC milling, drilling and tapping produce massive cutting heat at the contact area between cutting inserts and metal chips. If cooling and boundary lubrication are insufficient, cutting edges will suffer accelerated abrasive wear. Built‑up edge will adhere to the tool tip, causing poor surface finish and dimensional deviation of machined parts. In humid workshop environments, freshly exposed metal surfaces are prone to flash rust within a short period after machining. Severe flash rust leads to workpiece rejection and increases cleaning workload. Fully‑synthetic coolants sometimes show insufficient boundary lubrication under heavy tapping and deep‑drilling conditions, while straight neat oil suffers poor heat dissipation.

This semi‑synthetic formula balances the cooling capacity of water‑based fluids and the boundary lubricating performance of oil‑based products. The EP additives form a protective lubricating film under high contact pressure at cutting interfaces to reduce tool friction and chipping. The integrated rust‑inhibitor system creates a thin protective film on newly‑machined metal surfaces to resist flash corrosion. It is compatible with most ferrous and non‑ferrous alloys for general‑purpose CNC workshop production.

For workshop application, prepare working solution by diluting the concentrated fluid with clean water within the recommended concentration range. Monitor working concentration, pH value and biological condition of the circulating fluid on a regular schedule. Remove metal chips and fine swarf through filtration. Supplement fresh concentrate when concentration drops. Avoid contamination with other different types of metalworking fluids.

Prevent foreign debris contamination, prolonged high‑temperature storage and direct sunlight. High‑temperature storage may degrade emulsifiers, resulting in phase separation of the concentrated product.

Major application fields include cooling and lubrication for CNC milling, drilling, turning and tapping of carbon steel, alloy steel and grey cast iron; temporary anti‑rust protection for machined components and machine‑tool interior surfaces; service for standalone CNC machines and central fluid circulation systems.

Store the product in tightly‑sealed original plastic drums within 10‑30℃. Keep away from direct sunlight and freezing conditions. Thorough agitation is suggested before dilution for long‑stored concentrate batches.

Previous : (JSYAPG-S001) Nano Polishing Slurry Colloidal Silica/Alumina Water-Based, for Semiconductor Wafer, Optics & LCD Nano-Finish Next : (JSYAPG-S003) CMP Slurry Wafer Colloidal Silica Ultra-High-Purity Metal Ions <1ppb, for Silicon & Compound Wafer Planarization

Copy product links

Long by picture save/share

Add Successfully

Continue To Visit Inquiry Now

(JSYAPG-S002) CNC Cutting Fluid Semi-Synthetic, EP Lubricant & Rust Inhibitor for CNC Milling Drilling Machining Coolant

enquiry

Add Successfully

Continue To Visit Inquiry Now

Jishengya Technology

Shenzhen Jishengya Technology Co., Ltd. is located in Shenzhen, a special economic zone, and is a comprehensive technology enterprise integrating independent R&D, production and sales.